# More comfy saddle

**URL:** <https://www.stridaforum.com/t/more-comfy-saddle/306>\
**Category:** Tips and Techs\
**Created:** [March 11, 2009, 12:23pm UTC](https://www.stridaforum.com/t/more-comfy-saddle/306 "2009-03-11T12:23:54Z")\
**Posts on this page:** 3\
**Page:** 4

<div class="post-metadata">

**Author:** ![Doranine](https://www.stridaforum.com/user_avatar/www.stridaforum.com/doranine/32/2936_2.png) [@Doranine](https://www.stridaforum.com/u/Doranine)\
**Post date:** [June 7, 2025, 12:35pm UTC](https://www.stridaforum.com/t/more-comfy-saddle/306/61 "2025-06-07T12:35:56Z")

</div>

After roughly searching through [Japanese blogs](http://www.enthusiast.jp/ittoku/bicycle/?date=20130921), I came to the conclusion that the Velo Plush VL6146 is the better saddle.

However, I was interested to hear that the Electra Cruiser One, a saddle designed for beach cruisers, is surprisingly good.  
It might be worth considering other saddles suitable for beach cruisers. 🤔

And personally I would like to try [Panasonic’s](https://cycle.panasonic.com/accessories/saddle/) Tail-Up Saddle NSSS044 or Soft Cushion Saddle NSSS045. 🥴

---

<div class="post-metadata">

**Author:** ![Doranine](https://www.stridaforum.com/user_avatar/www.stridaforum.com/doranine/32/2936_2.png) [@Doranine](https://www.stridaforum.com/u/Doranine)\
**Post date:** [June 14, 2025, 6:08am UTC](https://www.stridaforum.com/t/more-comfy-saddle/306/62 "2025-06-14T06:08:03Z")

</div>

I installed the Panasonic Tail-Up Saddle Light NSSS046 on my mk1, which is slightly different from the one mentioned above.

 ![IMG_4761](https://www.stridaforum.com/uploads/default/original/2X/8/8b0ac9fbeb3bd4832244c6121d426e8021742092.jpeg)  
As explained in the newer STRiDA manual, I removed the original saddle by loosening the bolts and nuts with a 13mm wrench and spreading them apart with a screwdriver, then I was able to install it easily by following the reverse procedure. 🧑‍🔧  
 ![IMG_4763](https://www.stridaforum.com/uploads/default/original/2X/b/bb7d8a0fd6ed5c42086c3df8748daf99382ae755.jpeg)  
The plastic cover at the bottom of the tip, which I was concerned about in [my diary like post](https://www.stridaforum.com/t/an-old-and-funny-black-thing-im-loveing-it/4674/5), was attached without needing to be removed. It looks like the The saddle position seems to be a little high up in the front, but I didn’t feel any pain in my groin even after riding for just under 10km.  
 ![IMG_4764](https://www.stridaforum.com/uploads/default/original/2X/0/07b6f1b6471f074dd444a02de58a9be1053c9b2a.jpeg)  
 ![IMG_4765](https://www.stridaforum.com/uploads/default/original/2X/d/dc8a24b48eae20a35ab562d9974497a904fe33da.jpeg)  
It’s wide (total width 210mm, front to back length 255mm) and has a raised rear end, so your butt is less likely to shift out of position, and thanks to the soft material and the rubber damper under the saddle that acts as a spring, I didn’t feel any pain even after during this amount of touring.

Although I am concerned about the following points mentioned in the quote below and the silhouette which may look a bit unfashionable, it is a good product. 👍

> [@An old and funny black thing, I'm loveing it](https://www.stridaforum.com/t/an-old-and-funny-black-thing-im-loveing-it/4674/6):
>
> …although the Panasonic logo might not suit it very well.

I hope this information will be helpful for you to find a comfortable STRiDA saddle. Cheers,

Doranine

---

<div class="post-metadata">

**Author:** ![Doranine](https://www.stridaforum.com/user_avatar/www.stridaforum.com/doranine/32/2936_2.png) [@Doranine](https://www.stridaforum.com/u/Doranine)\
**Post date:** [June 23, 2025, 12:29pm UTC](https://www.stridaforum.com/t/more-comfy-saddle/306/63 "2025-06-23T12:29:47Z")

</div>

It’s not as bad as the STRiDA MK1, but after about 10km my butt hurts, so I replaced the saddle with a wider VELO Plush VL6146, and at the same time lowered the saddle height, which was too high.

 ![IMG_4913](https://www.stridaforum.com/uploads/default/original/2X/d/d4d0fd1f1fc98ee7e205a21faa287876871a91c5.jpeg)  
 ![IMG_4915](https://www.stridaforum.com/uploads/default/original/2X/d/d8ac0cd42a29f5a60e3a5dd6ba031358e49d6401.jpeg)

Removing the bolts and removing the clamps to adjust the STRiDA saddle height is a real pain…

I also transplanted the taillight base (RM-1 544-6510) and CATEYE OMNI5 that I had been using previously.

 ![IMG_4914](https://www.stridaforum.com/uploads/default/original/2X/7/713bb2b45debe01101b863b8a8abdcda83fa01a7.jpeg)

[Previous page](https://www.stridaforum.com/t/more-comfy-saddle/306.md?page=3)
