# how to get ball back in socket

**URL:** <https://www.stridaforum.com/t/how-to-get-ball-back-in-socket/496>\
**Category:** Strida Problems and Answers\
**Created:** [August 19, 2010, 2:22am UTC](https://www.stridaforum.com/t/how-to-get-ball-back-in-socket/496 "2010-08-19T02:22:21Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![noglider](https://www.stridaforum.com/letter_avatar_proxy/v4/letter/n/3da27b/32.png) [@noglider](https://www.stridaforum.com/u/noglider)\
**Post date:** [August 19, 2010, 2:22am UTC](https://www.stridaforum.com/t/how-to-get-ball-back-in-socket/496/1 "2010-08-19T02:22:21Z")

</div>

I’m a mechanic, working on a friend’s Strida. I’ve never worked on a Strida before.

I managed to true the rear wheel. That was a challenge, because it’s small, and because it looked too hard to remove from the bike.

My problem is that in trying to lubricate the rear brake cable, I removed the ball from the socket at the top of the frame. That part was hard, and now I can’t get the ball back in. I’ve used extreme force, and that’s clearly not the answer. There must be a technique of finesse.

Help?

Also, I would love to replace the rear brake cable housing, but am I asking for more trouble?

Thanks!

Tom Reingold  
Maplewood, NJ, USA

---

<div class="post-metadata">

**Author:** ![Blackstridaaustria](https://www.stridaforum.com/user_avatar/www.stridaforum.com/blackstridaaustria/32/12_2.png) [@Blackstridaaustria](https://www.stridaforum.com/u/Blackstridaaustria)\
**Post date:** [August 19, 2010, 7:12am UTC](https://www.stridaforum.com/t/how-to-get-ball-back-in-socket/496/2 "2010-08-19T07:12:38Z")

</div>

Hi Tom,

Problem 1:  
Point B) General Tips 3.  
[strida.us/Tips-from-Mark.pdf](http://www.strida.us/Tips-from-Mark.pdf)

Or: [video.google.com/videoplay?docid … 542897454#](http://video.google.com/videoplay?docid=2951533096542897454#)

Problem 2:  
Here a series of pictures (including how-to in english) about changing the brake cable can be found:  
[hkstrida.org/forum/viewtopic … rake+cable](http://www.hkstrida.org/forum/viewtopic.php?f=14&t=3370&hilit=brake+cable)  
You will have to login…  
[hkstrida.org/forum/ucp.php?mode=login](http://www.hkstrida.org/forum/ucp.php?mode=login)

Best regards

Blackstridaaustria

---

<div class="post-metadata">

**Author:** ![Amuro\_Lee](https://www.stridaforum.com/user_avatar/www.stridaforum.com/amuro_lee/32/4_2.png) [@Amuro\_Lee](https://www.stridaforum.com/u/Amuro_Lee)\
**Post date:** [August 19, 2010, 10:11am UTC](https://www.stridaforum.com/t/how-to-get-ball-back-in-socket/496/3 "2010-08-19T10:11:47Z")

</div>

Hi!

There’s another thread talking about this, too. 😉  
[url][Quick way for getting the Ball Joint back in place](https://www.stridaforum.com/t/quick-way-for-getting-the-ball-joint-back-in-place/119/1)]

---

<div class="post-metadata">

**Author:** ![noglider](https://www.stridaforum.com/letter_avatar_proxy/v4/letter/n/3da27b/32.png) [@noglider](https://www.stridaforum.com/u/noglider)\
**Post date:** [August 19, 2010, 12:58pm UTC](https://www.stridaforum.com/t/how-to-get-ball-back-in-socket/496/4 "2010-08-19T12:58:32Z")

</div>

I thank both of you. I did search through the forum before asking, but I didn’t see that thread.

I will try it today. Wish me luck. I will tell you if it works.
