sunkist-evo3:
Looking at the magnified picture above, it seems that the outer surface of the snubber is not aligned with the axis of the bolt, which would be an indication of a worn out bearing.
Or is it just an optical effect?
Chester_Tan:
Have you checked the belt tension? It could be loose.
You don’t need to tighten the freewheel as it tightens when you pedal but it would help if you put grease on the hub threads before putting the freewheel back so that it would be easier to remove later on. Trust me, I’ve tried it and it took me just a couple of hits on the lever of the tool to loosen the freewheel.
Hi. Yes, it is really tight.
Thank you for the tip. Unfortunately I have already mounted back the freewheel, but I note the tip.
Bietrume:
sunkist-evo3:
Looking at the magnified picture above, it seems that the outer surface of the snubber is not aligned with the axis of the bolt, which would be an indication of a worn out bearing.
Or is it just an optical effect?
Hello Bietrume,
It is just an optical effect. Sometimes I turn myself into a magician