to remove the old bowden connect some rope to find the way back with new one…
new and old bowden cables
how to do propper cabling take a look at the bible:
sheldonbrown.com/cables.html
the original cabel had a extra hose around in the area of the ball joint
i used heat shrink tube to reinforce this area
front bowden cable in place with balljoint fixation
i changed left and right position - bikes from england have on right hand side the front brake lever - and all my bikes have left hand the front brake… its a safety decision
the ball in place with cable from back brake - here you see the reinforcement
and first view as an “A” since my tumble in january…
