To adjust belt tension at an EVO we’ll need a bigger sized hook key than for the previous 60 mm bottom brackets. For now, it seems that just Strida Canada is offering the correct hook key officially, it can be found here: Strida EVO 95 mm Hook Wrench
This key was equipped with a square hole which is intended for connecting to a torque wrench.
Please note that he recommended torque of 50-60 Nm (according to the KS3 manual) MUST NOT be equal to that which you have to adjust at your torque wrench!
That’s because the square hole is not located in the center of the key; due to the distance the torque must be corrected.
As soon we’ve figured out the exact distance we’ll edit the correct torque amount for this particular key.
Recommendation level: ***** Five Stars (of five) 