Hello AxeStrida,
sorry but I’m not familiar with the Strida 3.0 series…
Looking at the drawing, I think it should be equal to the newer versions - both bearings should stay in the hub once the wheel was removed.
However, if a bearing was pressed onto an axle, you’ll need outer bearing puller, maybe like that:
More info, for example, here:
http://www.skf.com/group/products/maintenance-products/mechanical-tools-for-mounting-and-dismounting/bearing-pullers/external-pullers/index.html
These tools grab the outer ring of the bearing and the pulling force is applied to the axle.
It might be possible that the brake pads must be removed before to reach the bearing.
Are you able to imagine the function?