Modifications of Strida 1

The owner of the Strida 1 in Hong Kong started to modify his bike recently.

Dismantling
DSC06054.JPGDSC06059.JPGDSC06060.JPGDSC06122.JPG
Testing of 18" wheels
DSC06124.JPGDSC06128.JPG


New parts and accessory
DSC06045.JPGDSC06044.JPG
Renovation
DSC06052.JPGDSC06054.JPGDSC06059.JPGDSC06060.JPGDSC06122.JPGDSC06124.JPGDSC06128.JPG
To be continued…


DSC06028.JPG
DSC06030.JPG
DSC06034.JPG
DSC06033.JPG

I’m completely lost here. What exactly got modified anyway?

Transitional form

092.jpg104.jpg022.jpg

WoW I wish I worked that neatly - great job !!

The BB axle of Strida 1 can be modified to adapt differnt crank arms. :wink:
strida1+3_01.jpg

In order to use the magnetic wheel clip system on Strida 1, the axles and wheels must be replaced with those parts from Strida 3.
[url]Strida "2" owner needs our help! on Bikeforums - #4 by Human_Amp]

The rear axle and rear wheel of Strida 3 can be installed on the frame of Strida 1 without problem.
strida1+3_02.jpg
However, you have to “create” a completely new style front axle in order to install the front wheel of Strida 3 onto the “fork” of Strida 1.
strida1+3_03.jpgstrida1+3_04.jpg
Strida 1 successfully installed with the wheels of Strida 3 :mrgreen:
strida1+3_05.jpgstrida1+3_06.jpg
It is better to spray the grey wheels into black to match the colour pattern of Strida 1 :sunglasses:
strida1+3_07.jpg.jpg

Finalised version :sunglasses:

DSC09082.JPGDSC09085.JPGDSC09092.JPG
Metal brake cable protector installed on Strida 1
DSC09087.JPG

hello. just restored a strida mk 1 and i want to convert it to a square tapered spindle also. is there a special modication you have to do to the freewheel chainring or do i have to get a special bb axle or have one modified?